/ Home » Other / Tags: Grizzly Industrial
Grizzly G9933 3 HP Three-Spindle Shaper
The heavy-duty G9933 3 HP Three-Spindle Shaper will quickly pay for itself in cabinet and production shops that normally require several shapers. Set up each station and cut a different profile to reduce time-consuming cutter changes. The combinations of cutters and setups you can utilize on this machine are endless.
The G9933 is equipped with three 3HP motors and is designed to be used with only one motor operating at a time. There is one power ON/OFF switch for the entire machine located on the cast-iron cabinet. Each station of the shaper has an independent spindle switch to select the direction of spindle rotation or to stop rotation.
The three fences are a two-piece, independently adjustable system. Each outfeed fence can be adjusted to provide support for the workpiece as it passes by the cutter for either full or partial edge cutting.
This shaper creates substantial amounts of wood dust while operating and a minimum 400 CFM is recommended at each dust port.
Motor: (3) 3 HP, 220V, single-phase, 18A
Maximum cutter height: 4-9/16″
Maximum cutter diameter: 6″
Spindle diameter: 1-1/4″
Spindle length: 5-7/8″
Spindle capacity under nut: 4-1/2″
Spindle speeds: 7000 & 10,000 RPM
Spindle travel: 4″
Spindle openings: 3-1/4″, 6-1/4″, 8-1/4″
Table counterbore: 8-1/4″ dia., 3/8″ depth
Table size: 21-3/4″ x 28-1/4″
Floor-to-table height: 35″
Footprint: 34-1/4″ x 37-1/4″
Overall dimensions: 45-1/2″ W x 52-1/8″ D x 45″ H
Approx. shipping weight: 1260 lbs.
Three motors with separate FWD/REV switches for each
Three micro-adjustable fences
Three 4″ dust ports
Includes heavy-duty cast-iron miter gauge, adjustable 60° left/right
Spindles include spacers and nuts
Spindle turning lock
Includes service wrenches & tool box