/ Home » Other / Tags: Grizzly Industrial
Grizzly G1035 Shaper
The G1035 1-1/2 HP Shaper was built with plenty of muscle to mill a wide variety of profiles on wood stock, perfect for hobbyists and cabinet shops. The 1-1/2 HP motor rotates the interchangeable spindles at 7000 and 10,000 RPMs. The forward/reverse switch start, stops and reverses spindle rotation can be disabled and locked with a padlock.
The G1035 comes with one aluminum insert and one cast-iron insert, giving you three possible diameter openings in the shaper table surface. Use the smallest opening that a particular cutter will allow. This offers more support for the workpiece and reduces the amount of chips that can fall into the machine.
The independently adjustable cast-iron fence screws to the precision-ground cast-iron table. Hold-down springs are used to hold the workpiece flat on the table and snug against the fence.
Additional features include a handwheel for spindle height adjustments and a spindle height scale that displays the height position of the spindle in inches—all for less than the price of a router and router table!
SPECIFICATIONS:
Motor: 1-1/2 HP, 120V/240V (prewired 120V), single-phase, 12A/6A
Maximum cutter height: 2-1/2″
Maximum cutter diameter: 5″
Spindle diameters: 1/2″ and 3/4″
Spindle lengths: 2-3/4″ and 3-1/2″
Spindle capacity under nut: 2″ and 2-1/2″
Spindle speeds: 7000 and 10,000 RPM
Spindle travel: 3″
Table insert openings: 1-1/4″, 3-1/2″
Table counterbore: 5″ dia. x 7/16″
Table size: 20-1/4″x 18″
Floor-to-table height: 33-1/2″
Footprint: 15-1/2″x 17-1/2″
Overall dimensions: 22″ W x 25″ D x 40-1/2″ H
Approximate shipping weight: 221 lbs.
FEATURES:
Two spindle speeds
Motor reversing switch
Precision-ground cast-iron table
Independently adjustable cast-iron fence with safety guard
Hold-down springs
Steel cabinet-type stand
Powder-coated finish
Cast-iron miter gauge & starting pins
Includes 1/2″ & 3/4″ spindles