/ Home » Other / Tags: Grizzly Industrial
Grizzly G0819 15 inch 5 HP Open-End Wide-Belt Sander
If you are looking for the features and construction of some of our bigger machines but lack the space or necessity for their size, then look no further. The G0819 packs a lot of machine into a small amount of real estate. With a footprint of 29″ x 23-1/2″, this heavy-duty sander is capable of sanding a 30″ wide workpiece in two passes. There is even an adjustable side support that slides out from the side of the machine, eliminating the need for aftermarket supports. Other quality features such as an amp meter, separate table feed motor, and pneumatically-controlled belt oscillation make this nothing short of a high-caliber machine.
Specifications:
Sanding belt motor: 5 HP, 220V, single-phase, 1725 RPM, 30 A
Conveyor motor: 1/2 HP, 220V, single-phase, 2.8A
Air requirement: 57-75 PSI, 2 CFM
Sanding belt size: 16″ x 48″
Surface speed of sanding belt: 2300 CFM
Maximum board width: 15″ single pass, 30″ double pass
Maximum board thickness: 5-1/2″
Minimum board length: 12″
Conveyor speed rate: 16.4, 23, 32.8 FPM
Overall size: 32-1/2″W x 35″D x 61-3/4″H
Approximate shipping weight: 930 lbs.
Features:
Independent conveyor and sanding belt motor control
Pneumatic belt tensioning
Pneumatic belt tracking
Two rubber pressure rollers
Amp meter
Safety shut-off bar
Inch/metric thickness scale
Disc brake for emergency stops
5″ dust port
1-3/4″ x 15-3/8″ graphite platen