Grizzly G1028Z2 Portable Dust Collector
The G1028Z2 1-1/2 HP Portable Dust Collector is designed to capture dust and wood chips from woodworking machines, such as table saws, jointers, and planers.
The air drawn in by the dust collector is filtered before it returns to the workspace.
The G1028Z2 has an air suction capacity of 1300 CFM and has a max static pressure of 9.0 in.
Static pressure is produced by the 12-3/4″ cast-aluminum impeller to move the wood chips into the collector.
The G1028Z2 features a 2.5 micron upper filter top bag to capture the fine dust particles that normally end up all over your shop.
The steel base has been fitted with casters for mobility in your garage or shop.
The G1028Z2 manual was written by our U.S. based Technical Documentation Department and is packed with useful information.
The complete and easy-to-read manual provides full instructions on how to assemble and maintain your dust collector.
Motor: 1-1/2 HP, 120V/240V (prewired for 120V), single-phase, 12A/6A
Air suction capacity: 1300 CFM
Static pressure: 9″
Impeller: 12-3/4″ cast aluminum
Bag capacity: 5.7 cubic feet
Upper bag filtration: 2.5 micron
Bag size (dia. x depth): 19-1/2″ x 33″ (2)
Powder coated paint
Overall dimensions: 21-1/2 W x 33-1/2″ L x 78″ H
Approximate shipping weight: 118 lbs.
2.5 Micron upper bag filtration
12-3/4″ Cast-aluminum impeller
Steel base with casters for mobility
6″ inlet “Y” with two 4″ openings