Grizzly G0694 20 x 43 Heavy-Duty Variable-Speed Wood Lathe
The G0694 20″ x 43″ Variable-Speed Wood Lathe was built for heavy-duty use from the ground up.
Starting with its massive cast-iron construction, this lathe will minimize vibration.
The 3 hp Delta single-phase frequency drive provides 3-phase variable speed control with single-phase power supply.
The variable-speed control knob and digital RPM readout make it easy to dial in the perfect spindle speed between 100 and 3200 RPM.
The outboard tool rest and double-sided spindle allows for the turning of workpieces with diameters larger than 20″ on the outboard side of the lathe.
A forward/reverse switch and floor-supported cast-iron outboard tool rest also provide full flexibility for any outboard turning job.
Motor (with inverter): 3 HP, 220V, 3-phase, 9A
Required power supply: 220V, single-phase, min. 20A circuit
Swing over bed: 20″
Swing over tool rest base (banjo): 16-1/4″
Distance between centers: 43″
Spindle speed: Variable, 50 – 3000 RPM
Spindle threads: 1-1/4″ x 8 TPI
Spindle taper: MT#2
Tailstock taper: MT#2
Tool rest width: 13-13/16″
Tool rest post diameter: 1-1/4″
Footprint: 16-1/2″ x 77″
Overall dimensions: 103″ W x 25″ D x 49-1/2″ H
Approx. shipping weight: 814 lbs.
Precision-ground cast-iron bed
Single-phase inverter for 3-phase variable-speed motor
3-Step pulley system for 3 speed ranges
Quick-release belt tension lever for easy spindle speed range changes
Digital spindle speed readout
Forward/reverse spindle control
13-3/4″ wide outboard tool rest
Spindle indexed every 15°
Includes MT#2 live and spur centers