Grizzly G0440HEP 2 HP Dual-Filtration HEPA Cyclone Dust Collector
This G0440HEP is the same unit as our G0440, but pre-equipped with the upgraded dual-filtration HEPA filter system! Our dual-filtration HEPA cyclones are geared toward those looking for the best filtration on the market.
The G0440HEP 2 HP Dual-Filtration HEPA Cyclone Dust Collector features a primary filter with efficiency of 99.9% at 0.2-2 microns. The secondary HEPA filter has an efficiency of 99.97% at 0.3 microns in size.
The advantage of this dual filtration setup is the majority of all fine dust is captured by the first filter. Only the finest dust makes it to the HEPA filter, resulting in up to a 900% increase in the life of the HEPA filter, potentially lasting up to 10 years!
Cyclonic action separates the heavy dust particles from the fine particles and drops them into the 35-gallon steel drum. The fine dust travels past the 14-1/2″ diameter impeller and is then trapped by the cartridge filters made of spun-bond polyester. A clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance.
Casters mounted to the drum make disposal of the larger chips and dust as easy as it gets.
Motor: 2 HP, 220V, single-phase, 14A
Intake hole size: 7″
Impeller size: 14-1/2″ steel radial fin
Airflow capacity: 1354 CFM @ 2.5″ SP
Sound rating: 78–82 dB
Maximum static pressure: 10.4″
Filter surface area: 96 sq. ft.
MERV rating: MERV-17
Primary filter: 99.9% at 0.2-2 microns
Secondary filter: HEPA rated 99.97% at 0.3 microns
Collection drum: Steel, 35 gallons
Overall dimensions: 59″ W x 93-1/2″ H x 38″ D
Approximate shipping weight: 476 lbs.
Dual-filtration with BIA-certified cartridge filter and V-cell MERV-17 HEPA filter
Blower and barrel rotate 360 degrees for inlet and outlet positioning
Clear, disposable plastic collection bags
Gentle brush-cleaning mechanism inside cartridge filter
Ramped inlet maximizes dust flow into collection drums
Reinforced motor mount
Remote-controlled magnetic switch
Wall-mountable blower design
14-gauge steel stand